Trend T7EK 2100W 1/2" Variable Speed Router 240V

A powerful 1/2" trade rated Router with great power to weight ratio, electronic variable speed control with soft start feature for a better finish on various materials. This 2100W router can be used for multiple routing applications and is ideal for cutting or fitting worktops.

The Trend T7 Router features:

• Powerful 2100 watt motor for assured, consistent performance
• Soft start motor to minimise start up movement
• Trade rated, ideal for worktop fitting
• Supplied with 1/2 inch collet and 1/4 inch reducing sleeve
• Built in fine height adjustment
• For UK sale only
• Not suited for router table use
• Micro-adjustable fence for additional end user benefits
• Trammel adapter supplied for circle and curve cutting
• For UK & Eire sale only.

Note: This router does not have a Trend Configured Base and cannot be fitted to a router table without re-drilling the router table top surface.
If you want to use any of the Trend guide bushes, you will need a Unibase

Trend KWJ750P - Pro Multi-material worktop jig for up to 750mm worktop

Multi-material, Multi-function, Multi-backset Worktop Jig for fast, perfect jointing on any worktop from 150mm to 750mm with unique easy set window.

• FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops
• EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line
• 5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends
• FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
• SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
• FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
• MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
• NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths
• FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
• OFFSET CAMS Unique backset wedges for consistent easy setting
• EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles
• CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps

KWJ/OSD - Worktop True Cut Kitchen Worktop Jig Out Of Square Device

Worktop Jig Accessory for making fast, accurate angled worktop joints to accommodate out of square walls

• ADAPTABLE ANGLE RANGE Can be used for acute and obtuse wall angles up to 25 degrees out of square
• EASY SETUP Fast alignment to the worktop edge ensures correct backset position
• SIMPLE FOUR STEP PROCEDURE Measure, Mark, Clamp, Cut
• PRECISION FIT Front edge pivot point alignment ensures the backset is correctly set to match the female cut
• MULTI-PROFILE Works with any worktop edge profile from square edge to full bullnose
• QUALITY CONSTRUCTION Made from solid aluminium for maximum lifespan and accuracy
• INTERLOCKING COMPONENTS Two-part construction with keyed interlock to swivel easily into place and clamp firmly onto the jig without slipping

Trend C153X1/2TC Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips.

• 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick.
• Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops.
• Bottom cut feature for plunge work including stopped grooving and morticing applications.
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.