Trend DWS/CP8/FC - Classic Pro stone fine/coarse 8" x 3" inch double-sided with CraftPro Honing Guide & DWS/LF/100 Lapping Fluid (100ml)

Double-sided site or workshop bench stone comes with 100ml lapping fluid to help mantain or restore cutting edges of hand tools, spindle knives, chisels, plane irons etc. Ideal for wood turners and wood carvers, a razor edge is achievable in little time.

Lapping fluid was designed solely for use in the engineering industry for use with diamond abrasives and used for more than 30 years.

Trend DWS/CP8/FC Pro Stone

• Ideal for up to 3 inch plane irons and chisels.
• Unique clearance channel on coarse side to produce faster, cleaner cut.
• Solid diamond surface on fine side.
• Grit size clearly marked on surface.
• Precision flatness substrate.
• Unique diamond shaped surface prevents snagging when sharpening small or pointed tooling.
• Complete with pouch, cleaning block and non slip mat.
• Ex-fine 1000 grit (15 micron) and coarse 300 grit (50 micron).
• Guaranteed for five years when used with Trend Lapping Fluid.
• Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.
• Use with no pressure.
• Ideal for flattening chisels and plane blades as well as achieving a shaving edge in seconds.
• Precision flatness gives the ability to also sharpen spindle knives in house.
• The extra coarse grit is suitable to fix and restore a damaged edge on chisels, plane irons.

CraftPro CR/DWS/HG Honing Guide.

• Ensure correct angle is maintained on bevel edge chisels and plane irons when used with diamond whetstone.
• Roller with alloy body which self-centre clamps bevel edge chisels from 1/4 inch (6.35mm) to 1-1/4 (32mm) and plane irons up to 2- 9/16 inch (65mm) wide.
• The setting device is marked for 25 degree and 35 degree angles.
• Positive location for roller and blade.
• Adjustable stop for setting blade angle.
• Use with 63mm (2 1/2 inch) wide x 178mm (7 inch) long bench stones or workshop stones.
• Not for use with Firmer chisels or short blade (Butt) chisels.

Trend DWS/LF/100 Lapping Fluid

• WD 40 or other such lubricants are too thick and result it your tool skating over the diamond surface.
• Suitable for use with all quality diamond abrasive products. Use instead of water to reduce the threat of rusting by 95%. Reduces possibility of clogging, excessive build-up of residue and improves diamond performance.
• A synthetic based petroleum lubricant formulated to be used with diamond compounds.
• It has penetrating qualities and oil/water solubility, which not only increases the cutting action but also assures superior lubrication of every diamond particle throughout the honing process.
• Use with Trend DWS diamond abrasive range to guarantee a 5-year warranty.