This selection of radius cutters is of top quality, with PTFE-coated bits as confirmed by the black colour coding. The cutters are suitable for edge coving and fluting work with soft and hard wood, plywood, fibreboard and particleboard. Their extra-long (40 millimetres) shanks make identification and handling easier; the radius is 5 millimetres and total diameter 18 millimetres.

With a tungsten carbide tip and 2-millimetre micro grain, these cutters are designed for an extra-long working life, even when cutting the most abrasive materials. There is a choice of ¼-inch (approximately 6 millimetres) or 8 millimetre shank size.