The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe.

• Cuts both parts of the joint by reassembly of the tool.
• Router table use only.
• 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router.
• For certain routers the aperture in the base may need to be enlarged.
• A workholding device should be used when cutting the scribe cut on the rail ends.
• The cutting edges should be staggered to each other.