Trend C074X8MMTC Rounding over 3.2mm radius x 9.5mm cut

Excl. VAT £18.07 Incl. VAT £21.68
Item in stock
Rounding over 3.2mm radius x 9.5mm cut
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced
D=19 mm
C=3/8 inch
C=9.5 mm
B=9.5 mm
B2=12.7 mm
R=1/8 inch
R=3.2 mm
OL=61 mm
Shank Diameter=8 mm
D= 19 mm C= 3/8 inch C= 9.5 mm B= 9.5 mm B2= 12.7 mm R= 1/8 inch R= 3.2 mm Shank Diameter= 8 mm
Copyright © 2021 CNS Power Tools Limited