Trend C074CX1/4TC Rounding over 2.0mm radius x 9.5mm cut

Excl. VAT £19.16 Incl. VAT £22.99
Item in stock
Rounding over 2.0mm radius x 9.5mm cut
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced
D=16.7 mm
C=7.7 mm
B=9.5 mm
B2=12.7 mm
R= 2mm
OL=61 mm
Shank Diameter=1/4 inch
D 16.7 mm C 7.7 mm B 9.5 mm B2 12.7 mm R 2mm OL 61 mm Shank Diameter 1/4 inch
Copyright © 2021 CNS Power Tools Limited