Trend 46/115X8MMTC Bearing guided ovolo cutter 1.6mm radius

Excl. VAT £21.79 Incl. VAT £26.15
Out of stock
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads c
D=15.9 mm
C=5/16 inch
C=7.9 mm
B=9.5 mm
B2=12.7 mm
R=1.6 mm
OL=49 mm
Shank Diameter=8 mm
D= 15.9 mm C= 5/16 inch C= 7.9 mm B= 9.5 mm B2= 12.7 mm R= 1.6 mm Shank Diameter= 8 mm
Copyright © 2021 CNS Power Tools Limited